Different thicknesses of epoxy floor paint can be designed according to different functional requirements, such as 0.5-0.8 mm thick epoxy flat floor, 1-5 mm thick epoxy mortar floor, 1.5-3 mm thick epoxy self-leveling floor, etc. But for the diamond wear-resistant floor, it is not scientific to measure the thickness. Why? The diamond wear-resistant floor is constructed by the combination of diamond aggregate and cement, and the amount of material used in every place can not be guaranteed to be the same, so he can not measure it by the thickness.金刚砂耐磨地坪一般用每平米用多少公斤耐磨材料来衡量，一般来说金刚砂骨料每平方的正常用量是5-8公斤。金刚砂耐磨地坪是与新浇筑的混凝土地面一起施工的，也就是在浇筑混凝土地面后，等地面混凝土进入初凝阶段就往地面撒布金刚砂耐磨骨料。金刚砂耐磨骨料撒布后经过抹平压实后，金刚砂耐磨地坪的施工就基本完成了。
Diamond abrasion-resistant floor is generally measured by how many kilograms of abrasion-resistant materials are used per square meter. Generally speaking, the normal amount of diamond aggregate per square meter is 5-8 kilograms. Diamond sand wear-resistant floor is constructed with newly poured concrete ground, that is, after pouring concrete ground, when concrete on the ground enters the initial setting stage, it spreads diamond sand wear-resistant aggregate on the ground. The construction of diamond wear-resisting floor is basically completed after the diamond wear-resisting aggregate is spread and smoothed and compacted.因为金刚砂耐磨地坪的金刚砂骨料是通过人工撒布的，难以保证金刚砂耐磨地坪每个地方的耐磨骨料用量都一致，也就是每个地方的金刚砂耐磨地坪厚度是不一样的，而且金刚砂耐磨骨料是被压实到混凝土地面内部的，其厚度难以测量，尤其是水泥原色的金刚砂地坪。
Because the diamond aggregate of the diamond sand wear-resistant floor is spread manually, it is difficult to ensure that the amount of the diamond sand wear-resistant aggregate is the same everywhere, that is to say, the thickness of the diamond sand wear-resistant floor is different everywhere, and the diamond sand wear-resistant aggregate is compacted into the concrete floor, its thickness is difficult to measure, especially the original cement diamond ground. Ping.所以金刚砂耐磨地坪不适宜用厚度来衡量，而应用每平米施工多少公斤金刚砂骨料来衡量。其实，客户询问金刚砂耐磨地坪的厚度，就是想要知道他的质量好不好，施工后的地面耐不耐磨，那么，我们该如何确保金刚砂耐磨地坪施工后的质量呢?这就需要确保金刚砂骨料的质量以及按照正常标准5kg-8kg/㎡用量施工，另外，还要找一个施工经验丰富的地坪漆厂家，这样才能保证金刚砂耐磨地坪的质量。
Therefore, the diamond wear-resistant floor is not suitable to be measured by thickness, but by how many kilograms of diamond aggregate are constructed per square meter. In fact, the customer asked about the thickness of the diamond wear-resistant floor, that is, to know whether its quality is good or not, and how can we ensure the quality of the diamond wear-resistant floor after construction? This requires ensuring the quality of the diamond aggregate and the amount of construction in accordance with the normal standard of 5kg-8kg/. In addition, we need to find a floor paint with rich construction experience. Manufacturers, in order to ensure the quality of wear-resistant diamond floor.
标签:   地坪 环氧地坪漆 环氧地坪 环氧地坪施工 北京环氧地坪 金刚砂耐磨地坪